THOUGHT number 4
EXPLOSION ON GUN FOR GRAIN
As for the guns to blow up the grain, I wanted her to try it
do back in 1990, but never had enough time and money, and
customer was not.
The product is very interesting for the design engineer.
The creation of any new product requires the construction and testing
the firsxtexperimental samples of the product.
The design of the gun a lot of problematic sites requiring
experimental development - control the operating pressure in the gun,
grain moisture, temperature and method of heating the grain, the absence of
burnt on the inner walls, the reliability of the lock opening, etc.
The most difficult thing, in my opinion, this cover seal and enter the site
the tube pressure gauge at a pressure of 10 - 15 atm and 250 C.
to solve all these problems will require money and time.
If the issue with the pressure gauge can be simply avoided by deleting the node
rotation then seal the lid can be achieved only accurate
mechanics and literate PTFE seal.
As for the housing perogo sample gun I used the container from
5-liter carbon dioxide fire extinguisher.
Castle turned outward a bit cumbersome. Let's see how it will behave