PROBLEMS AND DEFICIENCIES IN EQUIPMENT
Disadvantages of the equipment does noxtexist without its merits.
The disadvantages inherent in any real working machine.
Actual specifications and description of equipment you can
check out the "EQUIPMENT"
Our equipment is constantly being upgraded. The disadvantages are eliminated
and replace them with new qualities emerge and new
disadvantages. For, as the Fox said Little Prince:
"NO PERFECTION IN THE WORLD."
The design of the working bodies Arahisoluschitelya classic
therefore, the process of peeling has virtually no complaints.
Problems arise at the inlet and outlet of the machine.
At the entrance
- this dust, arching in the hopper, the uneven
portion of the machine for manual loading.
- it's also dust and lack of separation of kernel and husk
in the absence of pre-calibration of beans.
Pay attention to the evolution of the unloading pipe (compare picture 1
and Photo 2).
If the area to which the husk falls off the machine after the split
on the zone, the zone closest to the machine will contain a
the number of nuclei. This mixture of kernel and husk should be re-
pass through the machine for optimum purity of the nucleus.
Ideally the machine should be powering a conveyor belt, and rushanku
pass through a chain: pnevmoseparator - kamneotbornik - sieve