SITE OF NICHOLAS RUSIN -

- PAINTING, SCULPTURE, PROSE AND MORE WHAT THAT


MAIN


LEAVE YOUR COMMENTS
ON THE PAGE OF OUR FORUM

CLASSIFICATOR for sunflower seeds

CLASSIFICATOR for sunflower seeds CLASSIFICATOR for sunflower seeds CLASSIFICATOR for sunflower seeds
Paddy car brand P-2.1 is designed to perform control Operations on the final purification of sunflower kernels from husks nedorazrushennyh and seeds in the production line or halva on the creamery. MAIN SPECIFICATIONS AND CHARACTERISTICS Maximum capacity, kg / h. ....................... 100 Weight, kg ............................................... .... 300 Motor .............. PBST-32 (1500 min-1, 6,5 A) Installed capacity, kW ................................ 2,0 Supply Voltage, V ................................ 380 (50 Hz) The volume of the hopper, m3 ............................... 0,125 Operating moves the table, mm .............................. 60 - 240 Number of strokes per minute ............................... 80 - 110 Number of channels ............................ 6 (3 per two levels). The quality of seed cleaning,%, not less than ......... 97 (at luzgistosti inlet no more than 7%). Dimensions, mm: - Width ...................................... 2000 - Length ....................................... 2000 - Height ...................................... 2000 CONTENT OF MACHINES The machine consists of a base, a rotary frame, the frame table, sorting table to the device supply and removal of heavy and light fractions, as well as drive the machine. List of main components of the machine: 1 Receiving hopper 2 gate device Three strings - turner 4 Reception box 5 Schieber off channels of operation 6 Sight window 7 Sorting table - the upper tier 8 sorting table - lower tier 9 Node tilt table 10 Stilling 11 Rollers The bed 12 13 Thrust 14 Eccentric (to adjust the stroke) 15 Counterweight 16 Intermediate shaft 17 Electric 18 nut to adjust the backwater of the product 20 Remote Control DESIGN AND PRINCIPLE OF OPERATION MACHINE On the frame 12 hinged swing frame with a slope of its nine drives. Sorting a table mounted on swing frame and is based support rollers 11 on the rotary frame and base frame 12. To ensure the smooth operation of the machine between the sorting table and a rotary frame mounted coil springs with preload them. The machine consists of motor 18 (PBST-32), 2-stage V-belt transmission, the flywheel 14 with an eccentric adjustment of the table and traction control, 13 connecting the drive with a frame table. On both sides there is a sorting table output tubes A and B for graded withdrawal of the product. Power device provides an equal amount of processed product to each cell sorting table, for which there are adjustment device. Raw material (sunflower seeds) comes from the hopper 1 in the chamber sorting table through gate (power supply) device 2. For free passing a string of raw-turner 3. The machine when you turn on the electric motor provides reciprocating sorting table with the frequency and speed, controlled within specified limits. Processed products (sunflower seeds) is fed through the device power evenly to each of the chambers of sorting table. Due to the reciprocating motion of the table sunflower seeds thrown from wall to wall of the chamber. In this case, due to differences physical characteristics nedorazrushennyh seeds and husks from the kernels of sunflower separates them. First, the lighter, rises to the top layer and through the configuration of the chamber walls, fly away "to the output nuclei of the same A. sunflower seeds remain in the lower layers, thus "linked" with each other, and by tilting the table heading for the exit B. Achieving the specified parameters of the machine performance and quality of treatment achieved by the joint control the following parameters: - Power device (the opening of the feed gate and the magnitude of the opening of nut); - Speed and frequency of movement of sorting table; - Slope sorting table.
©2010-2017 Сайт Николая Русина.