SITE OF NICHOLAS RUSIN -

- PAINTING, SCULPTURE, PROSE AND MORE WHAT THAT


MAIN


LEAVE YOUR COMMENTS
ON THE PAGE OF OUR FORUM

TRANSPORTER

TRANSPORTER TRANSPORTER TRANSPORTER TRANSPORTER
TRANSPORTER intended for transportation of bulk cargoes at various depots, loading and unloading and packaging items. Transporter is a stationary inclined conveyor with its own drive. SPECIFICATIONS Maximum performance for peanuts, kg / h. .................... 7000 Installed power, kW ......................................... 3,75 Supply voltage, V .................................... 380 (50 Hz) Angle to the horizont C .................................... 45 The length of the pipeline, m ............................... 3.66 Width of the deck, mm ....................................... 400 Lift height, m ............................................. 2,5 Speed, m / s ............................................... 0.1 - 0.7 The volume of the hopper, m3 ................................ 0,3 Weight, kg Dimensions, mm: - Width .................................... 2000 - Length ................................... 5000 - Height ................................... 3000 CONTENT OF MACHINES 1 base transporter 2 stars traction drive mechanism 3 tray 4 chain 5 star traction 6 bed 7 Remote Control 8 tensioner and the asterisk 9 Bunker 10 vibrolotok 11 Vibrator 12 shock absorbers vibrating feeders 13 frame driving mechanism 14 E. motor 3,0 kW 15 clutch 16 cups of the variator 17 toothed belt variator 32 x 10 x 1000 18 clutch 19 reducer H-100 20 clutch 21 bolt speed control drive 22 pin speed control drive 23 nut DESIGN AND PRINCIPLE OF PLANTS Infinite, closed in the vertical plane undercarriage transporter consists of carrying the burden of the plate chute flooring, 3 attached to the traction element in the form two chains 4. Transported cargo moves the upper branch of the pipeline; lower branch - bachelorhood. Chassis skirts trailing (tension), 8 and headaches (traction, drivers) Star 5; Traction sprocket 5 is obtained from the rotation driving mechanism 2, consisting of an electric motor 14, gearbox 19 and variator 16, 17. Tail sprocket 8 have the opportunity rectilinear movement that provides the tension pulling chains required for normal the pipeline. Downloading is the tail of the conveyor. The product is available from the hopper 9 through the gate controlled device and vibrating 10, 11, 12. Conveyor speed can be changed within the prescribed limits by adjusting speed shaft drive mechanism. This is achieved by changing the distance between the cups pulley variator with bolts 21, pins 22 and nuts 23. In this case, if one pulley increase the distance between the cups, the other pulley is decreases.
©2010-2017 Сайт Николая Русина.