INSPECTION, TESTING AND REPAIR PARTS MAIN TRANSMISSION
Before examination, the details of the main transmission
Wash, to facilitate identification of defects and wear.
On examination and verification, do the following.
1.Proverte, not on whether there are signs of increased wear of teeth
or damage and whether there are stains on xcontact
the working surface of the teeth. Upon detection of increased wear
parts that are not full engagement of gear teeth or the presence of
spalled teeth, replace them with new ones.
2.Proverte axis satelite state of the surfaces and holes
satellites, with minor damage buff
fine-grained surface sanded, and when
serious damage, replace with new parts.
Checking the status of the surfaces of the necks of the half-line gear and
seating surfaces on the box produce differential
the same way.
3.Osmotrite pinion bearings and gearbox differential;
they should be no signs of wear, with a smooth working
4.Zamenite bearing the slightest doubt as to their efficiency;
poor condition of the bearings may be the cause of noise and jamming
5.Proverte not have a sump on the main gear box and
differential deformation and fracture, if necessary, replace
them with new ones.