SITE OF NICHOLAS RUSIN -

- PAINTING, SCULPTURE, PROSE AND MORE WHAT THAT


MAIN


LEAVE YOUR COMMENTS
ON THE PAGE OF OUR FORUM

Rare-OLD CARS

MOSKVICH-412

Сайт для инженеров и механиков

Repair ENGINE

Removal and installation of the engine (with clutch and gearbox transmission). For the removal of the engine with the clutch and gearbox must be put the car on the lookout hole, so that the engine was under the hoxistor other lifting the device. Removing the engine perform the following sequence: 1. Remove the hood. 2. Open the valves and the engine heater, drain the cooling the liquid. 3. Remove the drain plugs in the oil crankcase and transmission housing and drain oil. 4. Disconnect the wires from the tip of the pole starter pin the battery. 5. Remove the radiator cooling system (see "Removing and radiator installation. ") Further work to remove the engine from the chassis of the car appropriately perform alternately on each side (left, on the right and bottom).
©2010-2017 Сайт Николая Русина.