SITE OF NICHOLAS RUSIN -

- PAINTING, SCULPTURE, PROSE AND MORE WHAT THAT


MAIN


LEAVE YOUR COMMENTS
ON THE PAGE OF OUR FORUM

Rare-OLD CARS

MOSKVICH-412

Сайт для инженеров и механиков

REPAIR HUBS
Removal and disassembly of the hub

Before removing the hub from the wheel, remove the wheel and turn the bolts that connect the hub to the brake disc. Then remove the nut and rasshplintuyte with a washer and hub from a pin. Remove the hub carefully, since the inner ring moves from the inner bearing pins, cuff and careless handling can damage the cuff. The outer ring of the outer and inner bearing with cuff can be extruded from the hub careful strokes hammer on the inner ends of the ring through a special mandrel (Fig. 169). The need for Extrusion outer ring of the bearing outer can take place only in the case of deterioration or destruction of bearing. The need for Extrusion outer ring of the internal bearing holds for bearing inspection, as withouxtextrusion does not understand the bearing (inner ring held in the hub of the cuff). If necessary, remove the snap ring bearing lungs hammer blows to ostrozatochennomu chisels, stubborn to the internal chamfer, slide the ring on the trunnion and further, by introducing a chisel in the resulting gap, remove the ring from a pin. Москвич-412
©2010-2017 Сайт Николая Русина.