Disassembly produce staples in that order.
A. Unscrew the tip of the flexible hose clamp and remove
protective caps on all cylinders.
Two. Remove the pistons 7 (Fig. 185) and 10 of the bracket.
Three. Remove the O-rings.
4. Remove the air release valves. further disassembly
bracket should not be exposed. To clean the cylinder bracket
of corrosion should be used putanku steel (sponge)
of a thin soft wire.
After completing the above steps, carefully check all
parts, wash them with warm water and detergent,
and dry with compressed air. Check to see if the pistons
and the mirror cylinder signs of wear or jamming, and with
necessary, replace the bracket in the kit.