SITE OF NICHOLAS RUSIN -

- PAINTING, SCULPTURE, PROSE AND MORE WHAT THAT


MAIN


LEAVE YOUR COMMENTS
ON THE PAGE OF OUR FORUM

Rare-OLD CARS

MOSKVICH-412

Сайт для инженеров и механиков

INSPECTION OF PIPELINES AND COMPOUNDS

A thorough check of all brake pipes is one of the important operations that prevent damage or malfunction of the system. When checking to make sure that all the details meet the following requirements. A. Metal pipes shall be located away from the sharp edges that could damage them, and do not have dents and cracks. Two. Flexible hoses must not come into xcontact with mineral oils or lubricants, rubber solvent, strong pressing Check the brake pedal, there does not appear on the hoses blistering, which are a sign of malfunction. These replace the hoses. Three. All mounting brackets piping must be properly tightened, weakening of the attachment is the cause of the vibration causing damage. 4. Is not allowed to drain fluid from nozzles, if necessary, Tighten the nuts to failure, making sure that the tightening is not deform the pipe. In all these cases, the relevant parts (if there is the slightest doubt as to their suitability), replace with new ones.
©2010-2017 Сайт Николая Русина.