Removing and installing the top cover drive sprocket timing
top cover is removed from the engine sprocket when
removal from the cylinder head, disassemble the drive timing
and complete disassembly of the engine before overhaul.
Disassembly make in the following sequence:
1. Remove the nuts attaching the head cover studs tsyilindrov
and remove it and seal.
2. Remove the eight bolts holding the top cover stars
Timing drive and remove it.
The installation covers verhneny privodagazoraspredeleniya produce
in reverse order. In this case, proceed as follows.
1. Pre-check tightness of nuts nine pins
attaching the bottom cover.
2. Replace the top cover, perform final tightening
first two bolts that secure the top cover to the bottom, then
all the rest (14).