SITE OF NICHOLAS RUSIN -

- PAINTING, SCULPTURE, PROSE AND MORE WHAT THAT


MAIN


LEAVE YOUR COMMENTS
ON THE PAGE OF OUR FORUM

Rare-OLD CARS

MOSKVICH-412

Сайт для инженеров и механиков

Check the electrolyte level

The electrolyte level should be 10-15 mm higher than the safety shield, mounted above the cage. The electrolyte level is measured glass tube having a proper mark at a distance of 10-15 mm from the end. To measure the level of the electrolyte in the battery, unscrew the cap and dip tube in a vertical position in the filler cap to lock in the safety shield, then close up the top and remove the finger. The height of the column of electrolyte in the tube corresponds to the height of the electrolyte level of safety shield. Raise the level of electrolyte should only top up of distilled water. Top up the electrolyte only in cases where it is known that the level of decreased as a result of spilling of the electrolyte.
©2010-2017 Сайт Николая Русина.