Cars IL (Fig. 213) are equipped with headlights like FG122KV.
In the double-strand flanged lamps installed incandescent lamp
45 and 40 W (45 W filament high beam, 40 watts - low beam). thread
beam lamp equipped with a screen. To the cap lamp is soldered flange
ensuring the correct position it in relation to the focus of the reflector.
Replacement of lamps in the lamp to produce such a sequence.
Remove the two screws holding the decorative cover and remove it.
Remove the three screws attaching headlamp to the vehicle body and remove the lamp.
Disconnect the connector block and a lamp, release the spring latch
lamp holder, lamp holder and remove. After replacing the lamp assembly
in the reverse order.
In the event of damage to the headlamp is necessary to replace the entire site
(diffuser with reflector), the connection of the lens reflector headlamps