Reguliryuvku headlights produce with the help of the screen, marked-up
According to Fig. 214.
The car with no load on level ground, set perpendicular to the screen
and at a distance of 5 m, so that the central vertical line at the screen
intersects with the longitudinal axis of the vehicle. After verifying the correctness of the inclusion
bulbs in both headlights. If you transfer lever switch and position light
included with the neighbor on the far spots of light from the headlights on the screen simultaneously
move up, so lights are included properly.
Turn on the headlights.
Adjust the position of optical elements by means of two adjusting screws
according to the layout screen. First, an adjustable lamp (another
closes with a piece of matter), then - the second lamp.
When adjusted headlamp upper limit of the horizontal part of the beam
(Line 4) must be parallel to the horizontal axis 3, and lie at a distance
50 mm below. The vertical axis of the lamp must pass through the intersection
horizontal and inclined sections of the light spot.
After adjusting the headlights on neighbor light, check adjustment of each lamp in the
separately, and then on the beam.
The center of the light spot to lie on the vertical axis of each lamp
25 mm below the axis 3.

Notice. Distance between centers 1020 mm round headlights.