SITE OF NICHOLAS RUSIN -

- PAINTING, SCULPTURE, PROSE AND MORE WHAT THAT


MAIN


LEAVE YOUR COMMENTS
ON THE PAGE OF OUR FORUM

Rare-OLD CARS

MOSKVICH-412

Сайт для инженеров и механиков

Removal and installation of wiper

Removing the wiper to produce the car in that order. A. Disconnect the "mass" wire from the battery. Two. Loosen the nut 7 (see Fig. 232) mount levers and remove the 6 brushes levers with brush. Three. Loosen the nuts 5 cups, 4 nuts, remove the sealing caps 3 and 2. 4. Remove the instrument panel (see Sec. "Removing and installing instrument panel"). Five. Remove the handle from the wiper switch and remove the nut fixing the wiper switch. 6. Disconnect the connector, the wire connecting the wiper with the main beam and wiper switch. 7. Remove the nozzle blowing the left side of the glass. Eight. Unscrew the two screws fastening the wiper to the bracket. 9. Remove the wiper, after disconnecting the tube washer Glass from the nozzle orifice. The installation of the wiper is made in sequence, the reverse of removal. Before any part of the friction grease lubricated.
©2010-2017 Сайт Николая Русина.