Disassembly is performed in the following sequence:
- Tick all the rooms and the rocker arm spacers so
to the assembly to install them to their former places;
- A blow to the mandrel of bronze and duralumin knock-axis
rocker of the holes on the cylinder head and remove
rockers, spacers, and springs.
Axes of the rocker arm assembly with the rocker arms in reverse
- Before assembly check the wear of working surfaces
rockers and their axes and, if necessary, replace defective parts
(See "Checking the status of the rocker arms and
their axes ");
- Set the rocker arms and spacers according to the label,
a rocker arm in accordance with the embossed symbol (Fig. 43);
- Before installing the rocker arm on the axle holes in the surface
yokes smazhte graphite lubricant.