SITE OF NICHOLAS RUSIN -

- PAINTING, SCULPTURE, PROSE AND MORE WHAT THAT


MAIN


LEAVE YOUR COMMENTS
ON THE PAGE OF OUR FORUM

Rare-OLD CARS

MOSKVICH-412

Сайт для инженеров и механиков

REPAIR OF SUPPLY AND EXHAUST GASES.
Carburetor repair DAA3-2140.
Disassembly and assembly of the carburetor

Dismantling in the following order: - Unscrew the strainer cap and remove the filter; - Loosen the screws holding the cover and karrbyuratora Remove the cover with the gasket; - Remove the axle and remove the float and the float seal gasket; - Remove the needle valve and remove the valve body; - Remove the nozzles; - Disconnect the wire from the sensor screw throttle; - Loosen the screw throttle body to the body of the carburetor and remove the throttle body; - Turning the propeller hub restrictive quality mix cut off the head of the sleeve and remove the screw; - Loosen the screw pressure plate and the housing EPHH Remove the economizer casing idling. WARNING! Due to the fact that the basic body parts throttle does not have interchangeable, housing, do not disassemble. Reassemble the carburetor in reverse order.
©2010-2017 Сайт Николая Русина.