SITE OF NICHOLAS RUSIN -

- PAINTING, SCULPTURE, PROSE AND MORE WHAT THAT


MAIN


LEAVE YOUR COMMENTS
ON THE PAGE OF OUR FORUM

Rare-OLD CARS

MOSKVICH-412

Сайт для инженеров и механиков

REPAIR OF SUPPLY AND EXHAUST GASES.
Carburetor repair DAA3-2140.
Setting the fuel level in the float chamber

For proper installation of the fuel in the carburetor check the distance between the float 8 (Fig. 50) and gasket 9 is equal to 6.5 + -0.25 mm. For the normal level bend the tab 6. In this case the reed support surface should be perpendicular axis of the needle valve and should not be damage. The cover 10 should be held upright so that the tongue lightly touches the ball six four, not utaplivayas it. The normal course of the float of 8 + -0.25 mm adjustable Roles bending all the way 2 .... 5 Plug the needle valve should be hinder the free movement of the float. When installing the carburetor cover, make sure that the float is not touches the walls of the float chamber.
©2010-2017 Сайт Николая Русина.