Almost all of the rear axle failure can be identified
during the operation when the vehicle:
a direct transfer, when the main transmission gear teeth
operate at full capacity on the front line of march;
coasting-enabled transmission, when the main gear
transmission can be operated on the front and back course with a minimum
coasting with the engine braking when work pinion
the main transmission in reverse with the increased load.
If you change the regime of motion can be identified shortcomings
in the entire transmission of the car.
In the case of partial or complete disassembly of rear axle
recommended to check the status and size of the working
the mating surfaces of parts and components to determine
wear and the possibility of further operation.
The maximum allowable axial play in the pinion
operation shall noxtexceed 0.1 mm.