Removing and installing rear axle sequence
1.Podnimite rear of the car with the lift
or jack, substitute supports under the thresholds for the jack stand.
2.Overnite oil drain plug and oil filler and drain the oil.
3.Otvernite bolts to the main drive shaft
transfer of the rear axle and remove the driveshaft.
Disconnect the drive cable of the rear parking brake system
of the equalizer, hydraulic brake hose rear
wheels on the tee and a rack of the pressure regulator set
on the rear axle casing.
4.Otvernite nuts ladders springs to overlays,
Remove the pads, walkways, and the holder of a rubber buffer
5.Pripodnimite rear axle on leaf springs and take it to the left
(in the course of the car).
Reassemble in reverse order.