Assembly axis in the following order.
1.Postavte vertical axis.
2.Set on axis 2 and the sleeve bearing plate
fixing the bearing.
3.Nadente on the axis of the bearing and zapressuyte (and up to
way into the thrust bearing.
4.Nxagreyte locking sleeve 4 to 300 ° C.
At a given temperature appear discoloration
(blue and violet).
5.Nadente locking collar on the floor. A large chamfer on the outer
surface of the sleeve should be facing toward the slots.
6.Napressuyte locking sleeve on the axle to the bearing ynora,
using the pipe end face perpendicular to the clipped
bore diameter of 32 mm, a length of 555-600 mm.